When your pipework starts making a noise, it is both annoying and worrying. Thankfully, it is usually a simple fix. Here are some tips on finding the cause of noisy pipes and the steps you can take to fix the issue.
Loose fittings
Over time, brackets that hold pipes can become loose. This means they may rattle when water is pushed through them. Check all the fittings and tighten them where necessary.
Pipes made from copper
Copper pipes expand and contract with heat, which can cause noise. While the only remedy for this is to replace copper pipes, it may help to reduce the water temperature on your boiler to lessen the effect. The angle of copper pipework also reflects how much it expands, as discussed in a study featured in Science Direct.
Water hammer
When loud bangs and rattles come from pipework, it is usually caused by air in the system. To fix this, you may need to switch off your water supply and drain the system. Refill it while leaving all the taps on to flush air from the pipes.
High water pressure
When water is forced through pipes at a high pressure, noise can occur. A simple fix for this is to ensure your boiler pressure is set to the correct bar, which is usually between 1 and 1.5.
Get expert help
Sometimes, fixing problematic pipework is beyond the scope of an average DIYer. Whether sewer pipe lining Solihull or drain repair in Dorset, expert help from companies such as https://www.wilkinson-env.co.uk/sewer-repairs-drain-lining-concrete-cutting/drain-repairs/solihull/ is essential.
Noisy pipes can be caused by a variety of reasons. By following this guide, you should be able to locate the cause and find the appropriate solution, leaving you with peace of mind once again.
Leave a Reply